Teletronics EZStation2 - Manual (Page 16)

Item Description
Key Length Select the WEP shared secret key length from
pull-down menu. The length can be chose
between 64-bit and 128-bit (known as “WEP2”)
keys.
The WEP key is composed of initialization vector
(24 bits) and secret key (40-bit or 104-bit).
Key Format Select the WEP shared secret key format from
pull-down menu. The format can be chose
between plant text (ASCII) and hexadecimal
(HEX) code.
Default Tx Key Set the default secret key for WEP security
function.
Value can be chose between 1 and 4.
Encryption Key 1 Secret key 1 of WEP security encryption function.
Encryption Key 2 Secret key 2 of WEP security encryption function.
Encryption Key 3 Secret key 3 of WEP security encryption function.
Encryption Key 4 Secret key 4 of WEP security encryption function.
Apply Changes Click the Apply Changes button to complete the
new configuration setting.
Close Click to close this WEP Key setup window.
Reset Click the Reset button to abort change and
recover the previous configuration setting.
WEP encryption key (secret key) length:
Length
Format
64-bit 128-bit
ASCII 5 characters 13 characters
HEX 10 hexadecimal codes 26 hexadecimal codes
Wireless - Access Control
If you enable wireless access control, only those clients whose wireless MAC addresses
are in the access control list will be able to connect to your Access Point. When this
option is enabled, no wireless clients will be able to connect if the list contains no entries.