Teletronics EZStation2 User Manual
Page 46
Management - WatchDog
This page is used to do watchdog function using ping command. User set IP address,
interval and ping fail count conditions to decide whether router reboots or not.
Item
Description
Enable WatchDog
Click to enable watchdog.
WatchDog IP
Address
IP address that is referred.
Ping Interval
Fill in the value by seconds.
Ping Fail to reboot
Count
Fill in the value that is the threshold to reboot
router when ping fails.
Apply Changes
Click the Apply Changes button to complete the
new configuration setting.
Reset
Click the Reset button to abort change and
recover the previous configuration setting.
Management - Quality of Service
This page is used to do bandwidth control by ip address. User sets total and undefined
bandwidth first. Then set bandwidth by range of ip addresses.