Teletronics EZStation2 - Manual (Page 26)

Item
Description
PPPoE Click to select PPPoE support on WAN interface.
There are user name, password, connection type
and idle time settings need to be done.
User Name If you select the PPPoE support on WAN
interface, fill in the user name and password to
login the PPPoE server.
Password If you select the PPPoE support on WAN
interface, fill in the user name and password to
login the PPPoE server.
Service Name Fill in the service name of Service Name. The
default value is empty.
Connection Type Select the connection type from pull-down menu.
There are Continuous, Connect on Demand and
Manual three types to select.
Continuous connection type means to setup the
connection through PPPoE protocol whenever
this WLAN Broadband Router is powered on.
Connect on Demand connection type means to
setup the connection through PPPoE protocol
whenever you send the data packets out through
the WAN interface; there are a watchdog
implemented to close the PPPoE connection
while there are no data sent out longer than the
idle time set.
Manual connection type means to setup the
connection through the PPPoE protocol by
clicking the Connect button manually, and
clicking the Disconnect button manually.
Idle Time If you select the PPPoE and Connect on
Demand connection type, fill in the idle time for
auto-disconnect function. Value can be between 1
and 1000 minutes.
MTU Size Fill in the mtu size of MTU Size. The default
value is 1400.
Attain DNS
Automatically Click to select getting DNS address for PPPoE
support. Please select Set DNS Manually if the
PPPoE support is selected.
Set DNS Manually Click to select getting DNS address for Static IP
support.
DNS 1 Fill in the IP address of Domain Name Server 1.
DNS 2 Fill in the IP address of Domain Name Server 2.
DNS 3 Fill in the IP address of Domain Name Server 3.
Clone MAC Address Fill in the MAC address that is the MAC address
to be cloned.