Teletronics EZStation2 - Manual (Page 37)

Item
Description
Key Management Click to select IKE or Manual mode.
Advanced Click Advanced button to configure more IKE
settings.
Connection Type Click to select Initiator or Responder mode.
Connect Click to connect manually. [Responder mode
only]
Disconnect Click to disconnect manually. [Responder mode
only].
ESP Click to configure 3DES, AES128 or NULL
encryption.
Click to configure MD5 or SHA1 authentication.
PreShared Key Fill in the key value. [IKE mode only]
Remote RSA Key Fill in the remote gateway RSA key. [IKE mode
only]
Status It shows connection status. [IKE mode only]
SPI Fill in Security Parameter Index value. [Manual
mode only]
Encryption Key Fill in encryption key. [Manual mode only]
Authentication Key Fill in authentication key. [Manual mode only]
Apply Change Click the Apply Changes button to save current
tunnel settings.
Reset Click the Reset button to abort change and
recover the previous configuration setting.
Refresh It shows the current connection status. [Manual
mode only]
Back It returns back to VPN Setup page.