Teletronics EZStation2 - Manual (Page 36)

VPN Setup - Edit Tunnel
Item
Description
Enable Tunnel # Click to enable the IPSEC VPN current tunnel.
Connection Name Assign the connection name tag.
Auth Type Click to select PSK or RSA.
Local Site
Local IP
Address/Network
Local Subnet Mask Click to select Single Address or Subnet Address
VPN connection.
Fill in IP address or subnet address depends on
which Local Site option you choose.
Fill in the local subnet mask.
Remote Site
Remote Secure
Gateway
Remote IP
Address/Network
Remote Subnet Mask Click to select Single Address, Subnet Address,
Any Address or NAT-T Any Address VPN
remote connection.
Fill in remote gateway IP address
Fill in IP address or subnet address depends on
which Remote Site option you choose.
Fill in remote subnet mask
Local/Peer ID
Local ID Type
Local ID
Remote ID Type
Remote ID Define IKE exchange information type
Click to select IP, DNS or E-mail as local
exchange type
Fill in local ID except IP selected
Click to select IP, DNS or E-mail as remote
exchange type
Fill in remote ID except IP selected