Teletronics IP-PBX Server - Manual (Page 23)

23
After press Modify can input detail setting for Extension.
 Extension Number: Assign the number of Extension. This number is also the register
name for device.
 Password: Assign the register password for device to register on EZLoop® IP-PBX
Enterprise SIP Server.
 Call Group: You can use the Call Group parameter to assign an Extension to one or
more groups.
 Pickup Group: You can use the Pickup Group option in conjunction with this
parameter to allow a ringing phone to be answered from another extension.
Note:

The Pickup Group option is used to control which Call Groups a channel may pick
up—a channel is given authority to answer another ringing channel if it is
assigned to the same Pickup Group as the ringing channel’s Call Group. By
default, remote ringing extensions can be answered with *8.

You can define multiple Call Groups and Pickup Groups for one Extension by a
“comma”. For example, you can input “1,3,5” into Call Group or Pickup Group.
 DialPlan: Define the dialing plan for Extension. It specifies the location of the
instruction used to control what the phone is allowed to do, and what to do with
incoming calls for this extension. In this field, you can Choose 5 dial level for
Extension, including [ext-only], [ext+R1], [ext+R12], [ext+R123], [ext+allroutes]. You
can define an “Outgoing call” record, to a certain Route Level, as R1, R2…, etc. [ext-
only] means this subscriber can only call to Extension. [ext+R1] means the subscriber
with such DialPlan can call to Extension and Route Level with R1. [ext+R12] means
the subscriber with such DialPlan can call to Extension and Route Level with R1 and
R2. [ext+R123] means the subscriber with such DialPlan can call to Extension and
Route Level with R1, R2 and R3. [ext+allroutes] means the subscriber with such
DialPlan can call to Extension and Route Level with R1, R2, R3 and R4.
Note:
•
For more information about Route Level, please refer to the user manual: 3.1.5.1
Outgoing Call Rule.