Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 18)

10

Metadata messages XML SDK V8.7.0 Remote Control Interface
Signal messages
Signal element
<Message version="1.0">
<Data>
<Signal>
<SignalParameter name="...">...</SignalParameter>
<SignalParameter name="...">...</SignalParameter>
...
</Signal>
</Data>
</Message>
The “Signal” element is used to return signal parameters delivered by the classifier. One message block
<Signal> ... </Signal> is sent for each classified signal.
Content
Following signal parameters names are supported: center, shift, spacing, baudrate, bandwidth, modula-
tion, confidence and level.
Contents of the signal parameter tags all have the same format: [Value][Unit][Flags].
The value (in [Value]) is required, unit and flags are optional.
Metadata messages
Main metadata message tag
MetaData element
<Message version="1.0">
<MetaData info="code">
Content
</MetaData>
</Message>
Attribute List
info
Indicates the type of metadata returned. This attribute is required and is a choice between “code” and
“code-list”. “code” is synonymous with the term “mode” used when referring to the decoder.
Content
The content is a sequence of one or more MDCode elements.
MDCode message
MDCode element