Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 51)

XML SDK V8.7.0 Remote Control Interface Parameter names and values

43
dbpsk
dpsk
dqpsk
dsp
dtmf
dxpsk
ffsk
fft
gfsk
iq
mfsk
ms
ofdm
oqpsk
qam
qpsk
src
subtone
time
speed
Symbol rate, or in case of cw-morse the number of words per minute, of the decoded data.
Values
An integer or float value, the range depends on the selected mode.
shift
Frequency shift of the signal.
Values
An integer value, the range depends on the selected mode.
center
Center frequency of the signal.
Values
An integer value, the range depends on the selected mode.
auto-mode
Sets shift, center frequency and speed automatically.
Values
“on” or “off”.
afc
Enables or disables automatic frequency control.
Values
“on” or “off”.
input
Sets physical inputs and custom defined inputs.
Values
"inp1", "inp2", …, "inp10" and all custom defined inputs.
Use the name of a custom defined input to select it.