Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 30)

22

Command messages XML SDK V8.7.0 Remote Control Interface
<Message version="1.0">
<Command>
<Get item="" information="" additional-information=""/>
</Command>
</Message>
Attribute List
item
The item the client requests. This attribute is required and is a string. If the string is not recognized by the
server, it will return an error message.
Description of possible item values:
“card status”
Returns the state of all cards in a system. The client does not have to be connected to a specific card on
the system.
“wcloud sources”
Returns the W-CLOUD devices which are configured in the W-CODE server.
“license”
Returns the license information for the currently connected card.
“license with check”
Returns the license information for the currently connected card. Using this value forces a check of the li-
cense information on the DSP.
“metadata”
Returns meta data. The kind of meta data is specified in the information attribute. The client does not
have to be connected to a specific card on the system.
“milstanag message type”
Returns the current message type for MIL or STANAG modes.
“parameter-list”
Returns the parameter list for the current mode.
“classifiersetup-settings”
Returns the current classifier configuration.
"custom-alphabet-list"
Returns a list of all custom alphabets that have been defined using the WAVECOM graphical user interface
alphabet editor.
"custom-input-list"
Returns a list of all custom inputs that have been defined with the WAVECOM graphical user interface or
the set command.
“cc-table-hf”
“cc-table-vhfdir”
“cc-table-vhfsub”
Returns the requested classifier codecheck signal database xml file.
information
Information about the item the client requests. This attribute is implied and is a string.
Description of possible information for the item metadata:
“code-list”
Returns a list of all codes supported by that server. “code” is the RCI term used for decoder mode.
“code”
Returns all information about a specific code. The specific code has to be set in the additional-
information attribute. “code” is the RCI term used for decoder mode.
additional-information
Additional information about the item the client requests. This attribute is implied and is a string. It is only
used if item is "metadata" and information is "code". The additional information returns the name of the
code. A list of all possible codes can be retrieved by selecting "code-list" in the information attribute.
Content
This element has no content.