Wavecom W-RCI (Remote Control) V8.7.0 - Manual (Page 52)

44

Parameter names and values XML SDK V8.7.0 Remote Control Interface
W51PC
“inp1” = AF-IN
“inp2” = IF-IN-VAR
“inp3” = IF-IN-10.7
“inp4” = IF-IN-21.4
“inp5” = EXT-DEM-IN
W61PC
“inp1” = AFIF#1
“inp2” = AFIF#2
“inp3” = AFIF#3
“inp4” = IF70#4
“inp5” = EXT-DEM
W-CODE
“inp1” = AF (left) input
“inp2” = AF (right) input
“inp3” = AF (left+right) input
“inp4” = IQ (left+right) input
“inp5” = Discriminator (right) input
W-PCI or W-PCIe
“inp1” = AF#1
“inp2” = IF70#1a
“inp3” = IF70#1b
“inp4” = AF#2
“inp5” = (empty)
“inp6” = IF70#2
W74PC
“inp1” = AF#1
“inp2” = IF70#1
“inp3” = AF#2
“inp4” = IF70#2
“inp5” = (empty)
“inp6” = (empty)
“inp7” = AF#3
“inp8” = IF70#3
“inp9” = AF#4
“inp10” = IF70#4
inputgain
Input gain.
Values
An integer value between 0 and 100.
number-of-channels
Controls the number of channels for “hf-analysis-mfsk-code-check”, “hf-analysis-psk-code-check” and “hf-
analysis-classifier-code-check”.
Values
2 to 64 for “hf-analysis-mfsk-code-check”
1 to 2 for “hf-analysis-psk-code-check”
1 to 64 for “hf-analysis-classifier-code-check”