AEC WD 350 through WD3000 Dehumidifying Dryers - Manual (Page 4)

Safety Considerations
AEC/Whitlock WDMR and WDFR Series dehumidifying dryers are designed to provide safe
and reliable operation when installed and operated within design specifications, following
national and local safety codes.
To avoid possible personnel injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:
Follow all SAFETY CODES.
Wear SAFETY GLASSES and WORK GLOVES.
Disconnect and/or lock out power before servicing or maintaining the dryer.
Use care when LOADING, UNLOADING, RIGGING, or MOVING this equipment.
Operate this equipment within design specifications.
OPEN, TAG, and LOCK ALL DISCONNECTS before working on this equipment. It is a
good idea to remove the fuses and carry them with you
Make sure the dryer and components are properly GROUNDED before switching on power.
Do not jump or bypass any electrical safety control.
Do not restore power until all tools, test equipment, etc. have been removed and the dryer
and allied equipment are fully reassembled.
Only PROPERLY TRAINED personnel familiar with the information within this manual
should work on this equipment.
WDMR and WDFR Series Dehumidifying Dryers Page 3