Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 138)

APR175P USER’S GUIDE
137 137
The AP Controller has the following management topology:
The AP Controller can configure settings of Managed Access Points (up to 7)
A Managed Access Point can belong to a single Access Point Group
An Access Point Group can have a 2.4GHz WLAN Group and a 5.0GHz WLAN Group
Each WLAN Group can have up to 16 unique WLAN networks or SSIDs (Wi-Fi Networks)
Each Managed Access Point will have a Status displayed on the right side.
Below is a legend for each status color:
Disconnected (Grey): The Access Point cannot be reached and is not available or disconnected from the
network.
Error (Red): The AP Controller could not connect with the Access Point. This can be because of several
reasons such as an authentication error or an incompatible management protocol.
Busy (Orange): The AP Controller is in the process of configuring the Access Point.
Connecting (Yellow): The AP Controller is attempting to connect to the Access Point. This includes the
authentication process of the Access Point to the AP Controller
Connected (Green): The AP Controller has successfully authenticated and connected to the Access Point.