Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 168)

APR175P USER’S GUIDE
167 167
I cannot configure Wi-Fi networks for my Managed Access Points.
a. Access Point Controller Management Topology:
The AP Controller can configure settings of Managed Access Points (up to 7).
A Managed Access Point can belong to a single Access Point Group.
An Access Point Group can have a 2.4GHz WLAN Group and a 5.0GHz WLAN Group. Each WLAN Group
can have up to 16 unique WLAN networks or SSIDs.
b. Check that all Access Points are in Managed Access Point mode and are on the same physical network
and same IP subnet as the Access Point Controller.
c. Click on Managed AP Settings on the top menu and check that all of your Managed Access Points appear
in the Access Points list.
d. Go to Wi-Fi Settings on the left hand menu and add Local Wi-Fi Networks.
e. Once you have Local Wi-Fi Networks created, add them to a Local Wi-Fi Network Group.
f. Click on Access Points from the Left side menu, and add an Access Point Group. After setting up the
details of your Access Point Group, near the bottom you can configure the Profile Group Settings. Select
the Wi-Fi network (WLAN) Group that you created with the Local Wi-Fi Networks.
g. Last apply the Managed Access Points to this group that you wish to use with the WLAN Group settings.