Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 88)

APR175P USER’S GUIDE
87
DHCP Client Range: The range of IP addresses provided by the DHCP server is defined by this field. You can
limit how many IP addresses are used in your network by setting a smaller or larger range.
DHCP Lease Time: The amount of time each device is given a specific IP is decided by the DHCP lease time.
After the Lease Time expires, the DHCP server will assign another IP address to the device.
Set Static DHCP: This allows specific devices to be given a specific IP address each time the device connects to
the network. The DHCP server will always assign the same IP address to the same device. This feature is often
used for shared devices such as network printers or servers.
Auto DHCP Server: The Auto-DHCP Server feature automatically manages the IP addresses within your
network. When connected to a network that has a DHCP server enabled, the Access Point/Router will
automatically obtain an IP from the network’s DHCP server and disable the DHCP server on the Access Point /
Router to avoid any IP assignment conflicts. For users that are not familiar with how this works, it is
recommended to leave Auto-DHCP server enabled on this page.
Local Network (LAN): LAN Port Settings
Configure settings for your Access Point’s two wired
local network ports.