Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 167)

APR175P USER’S GUIDE
166 166
blocking communication between the Access Points, Basic Setup will not be able to discover the Access
Points to configure them. Please make sure all Access Points are on the same network.
e. Check that all Managed Access Points are on the same IP subnet as the Access Point Controller.
Normally IP addresses are provided by the DHCP Server on your network’s router, however if your
network is running a static IP configuration, you will need to manually enter the IP for the AP Controller
and all Managed APs before configuring.
I have created an Access Point Group, but I cannot see any Wi-Fi networks.
a. Access Point Controller Management Topology:
The AP Controller can configure settings of Managed Access Points (up to 7).
A Managed Access Point can belong to a single Access Point Group.
An Access Point Group can have a 2.4GHz WLAN Group and a 5.0GHz WLAN Group. Each WLAN Group
can have up to 16 unique WLAN networks or SSIDs.
b. The Access Point Group does not have any WLAN Groups associated with it. Add WLAN Groups to the
Access Point Group by editing the Access Point Group: Managed AP Settings > Access Points