Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 92)

APR175P USER’S GUIDE
91
Internet Network (WAN): Internet Network (WAN) IPv4
Internet settings normally applies to the Access
Point when it is in Router mode. Basic Setup will
assist in the initial configuration of your Internet
Network settings in Router mode, however, in the
case that you wish to adjust settings manually, the
options on this page provides you with the tools to
do this easily.
Select your Internet Connection type from the
drop down menu:
Manual IP (Static): For Internet connections where the Internet provider does not provide you with an IP
address automatically. If you know the IP address and DNS settings that your Internet provider uses, select
this option.
Automatic/Dynamic (DHCP): This is the configuration type most often used by Internet providers. Automatic
configurations are used by both DSL and Cable as well as other providers. Under the Automatic Configuration
method, the Internet provider will assign your router an Internet IP address automatically.