Amped Wireless APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router - Manual (Page 47)

APR175P USER’S GUIDE
46
Wi-Fi Settings: AP Controller’s Local Wi-Fi
The Access Point Controller also features its own Wi-Fi networks. By
default the Access Point Controller’s Wi-Fi networks are disabled to
optimize the performance of the Access Point Controller’s
management functions. You can enable them here, however, during
heavy usage, this may negatively impact the performance of the
Access Point Controller.
The AP Controller’s default Wi-Fi ID for 5.0GHz & 2.4GHz networks is:
Amped_APR_5.0 and Amped_APR_2.4
To change it, enter a new name in the SSID field. Users connecting wirelessly to the Access Point will use these
IDs to identify your wireless network.
The default Security Key (WPA/WPA2) for your Wi-Fi networks is “wireless”.
Click Next when done to complete the Basic Setup wizard.