Archgard 10-1800P - Manual (Page 17)

Chalet 1800 17
LISTED COMPONENTS FOR MOBILE HOME INSTALLATION
OPTIONAL OUTSIDE AIR ADAPTOR
The adaptor is required if the Chalet 1800 is to be installed into a Mobile Home.
Attach with supplied self tapping screw and reinstall fan
(if used). Combustion air duct from outside can now be
attached to the 3" round collar. (Photo 3)
Mobile home installation requires the use
of outside air. When outside air is to be
used, the Mobile Home Combustion Air
adapter must be installed through the rear
of the stove base. (Photo 1)
Remove blower kit (if installed) Slide the
adapter into the “combustion air” slot, with
the 3" round duct facing down into the back
of the unit as in the photo and slide it into
the bottom of the unit. (Photo 2)
3
1
2
On leg or pedestal units, for Mobile Home Installations, outside air can ONLY be
brought in using the Mobile Home combustion air adapter .
INSTALLATION
After installing the “Mobile Home Combustion Air adapter” to the appliance continue to layout the duct
install and then cut or drill the hole in the wall and install the non-combustible ducting and insulation (if
required) and cap the system with a 1⁄4” mesh, rodent or pest screen hood.