Archgard 10-1800P - Manual (Page 6)

Chalet 1800 6
SAFETY NOTE: If this woodstove is not properly installed, a house fire may result. For
your safety, follow the installation instructions, contact local building, fire officials, or au-
thority having jurisdiction about restrictions and installation inspection requirements in
your area.
The authority having jurisdiction should be consulted before installation to determine
the need to obtain a permit.
WHEN LOCATING YOUR STOVE: Consider safety, convenience, traffic flow, and the
fact that the stove will need a chimney and chimney connector. It is a good idea to plan
your installation on paper, using exact measurements for clearances and floor protec-
tion, before actually beginning the installation.
These installation instructions describe the installation and operation of the CHALET
1800 woodstove. This stove meets the U.S. Environmental Protection Agency’s 1990
particulate emission standards. The Chalet 1800 is listed by Lab Test Laboratories,
Inc. to UL Safety Standard 1482, ULC S627, and (UM) 84-HUD. The Chalet 1800 is
approved for mobile home installations when not installed in a sleeping room and when
an outside combustion air inlet is provided. The structural integrity of the mobile home
floor, ceiling, and walls must be maintained. The stove must be properly grounded to
the frame of the mobile home and use only listed double-wall connector pipe. The Mo-
bile Home Outside Air Kit must be installed in a mobile home installation.
SAFETY LABEL
A copy of the label that accompanies each Archgard Chalet 1800, is printed on the next
page for your convenience.
NOTE: Archgard units are constantly being improved. If there is a conflict between the
label on the unit and the one printed here, the label on the unit is the correct one. The
safety label is located on the back panel of the stove.
YOUNG CHILDREN SHOULD BE CAREFULLY SUPERVISED WHEN THEY ARE IN
THE SAME ROOM AS THE APPLIANCE.