Fcoe, Basic concepts, Vsan – H3C Technologies H3C S12500-X Series Switches User Manual

Page 14: Fc zone

Advertising
background image

5

Zoning can solve the preceding problem by dividing a VSAN into zones and adding N_Ports to different

zones for different purposes. In this manner, N_Ports in different zones are separated to implement
access control.
For more information about FC zones, see "

Configuring FC zones

."

FCoE

A data center using the FC SAN technology usually comprises separate local area networks (LANs) and
SANs. LANs carry traditional Ethernet/IP services, and SANs carry network storage services.
To provide services for LANs and use SANs for storage simultaneously, the servers must use independent

Ethernet adapters and FC adapters. In addition, the IP switches and the FC switches are also

independent and have independent network connections. Such a network needs many switches,
network adapters, and cables, and it brings high investments and maintenance costs and low scalability.
FCoE was introduced to solve this problem. FCoE is a protocol that carries FC over Ethernet. In an FCoE

solution, the server uses an FCoE-capable Ethernet adapter, and the FCoE switch (FCoE forwarder)

integrates the functions of both the traditional IP switch and FC switch. FCoE reduces the number of
network adapters, switches, and cables, and the network operation and maintenance workload. In all,

FCoE reduces the total cost.

Figure 5 FCoE for I/O consolidation

As shown in

Figure 5

, in the traditional network, the server is connected to the LAN through an Ethernet

interface and to the SAN through an FC interface. In the FCoE network, the server is connected to the

FCoE-capable FCF switch, and then the FCF switch is connected to the LAN through an Ethernet interface

and to the SAN through an FC interface. The link between the server and the FCF switch can transmit

both Ethernet packets and FC frames.

Basic concepts

As shown in

Figure 6

, the link between the FCF switch and the ENode (nodes that can transport FC over

Ethernet, such as servers and disk devices) can be used for receiving and sending both Ethernet frames
and FC frames.

Advertising
This manual is related to the following products: