Configuring the fcf priority, Configuring the system fcf priority, Configuring the vfc interface fcf priority – H3C Technologies H3C S12500-X Series Switches User Manual
Page 26: Displaying and maintaining vfc interfaces and fip, Configuring vfc interfaces and fip, Vfc interfaces and fip configuration task list, Configuring a vfc interface
17
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Configure an FKA
advertisement period
value.
fcoe fka-adv-period
fka-adv-period
The default setting is 8 seconds.
Configuring the FCF priority
The FCF priority includes the VFC interface FCF priority and the system FCF priority, which are used in the
following scenarios:
•
The VFC interface FCF priority is used in the fcf priority field in an unsolicited Discovery
Advertisement.
•
The system FCF priority is used in the fcf priority field in a solicited Discovery Advertisement.
An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery
Advertisements and sends a FLOGI request to it for login.
The FCF priority is effective only on a VFC interface connected to an ENode (VFC interface in F mode).
Configuring the system FCF priority
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Configure the system
FCF priority.
fcoe global fcf-priority
priority
The default setting is 128.
The configuration takes effect on all VFC
interfaces in F mode.
Configuring the VFC interface FCF priority
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter VFC interface
view.
interface vfc
interface-number
N/A
3.
Configure the FCF
priority for the VFC
interface.
fcoe fcf-priority priority
The default setting is 128.
The configuration takes effect on a VFC interface
only when it operates in F mode.
Displaying and maintaining VFC interfaces and FIP
Execute display commands in any view.