H3C Technologies H3C S12500-X Series Switches - Manual (Page 40)

33
Configuring the VTEP as an ENDC
Step Command Remarks
1. Enter system view. system-view N/A
2. Create an NVE tunnel
interface and enter tunnel
interface view.
interface tunnel tunnel-number
mode nve By default, no tunnel interfaces exist on
the device.
3. Assign a network ID to the
tunnel interface.
network-id network-id
By default, no network ID is assigned to a
tunnel interface.
4. Configure a source IP
address or source
interface for the tunnel.
source { ipv4-address |
interface-type interface-number }
By default, no source IP address or
source interface is specified for a tunnel.
This step specifies the IP address that the
local ENDC registers with the ENDS. If a
source interface is specified, its primary
IP address is used.
5. Enable ENDC on the
tunnel interface. vxlan neighbor-discovery client
enable server-ip
By default, ENDC is disabled.
6. (Optional.) Enable ENDP
authentication.
vxlan neighbor-discovery
authentication { cipher |
simple } password
By default, ENDP authentication is
disabled.
7. Set the interval at which
the ENDC updates its
registration with the
ENDS.
vxlan neighbor-discovery client
register-interval time-value
By default, an ENDC updates its
registration with an ENDS every 15
seconds.
Displaying and maintaining ENDP
Execute display commands in any view and reset commands in user view.
Task Command
Display neighbors that an ENDC has
learned.
display vxlan neighbor-discovery client member [ interface tunnel
interface-number | local local-ip | remote client-ip | server
server-ip ]
Display ENDC statistics.
display vxlan neighbor-discovery client statistics interface tunnel
interface-number
Display ENDC information. display vxlan neighbor-discovery client summary
On an ENDS, display neighbors that
have registered with the ENDS. display vxlan neighbor-discovery server member [ interface tunnel
interface-number | local local-ip | remote client-ip ]
On an ENDS, display ENDS statistics.
display vxlan neighbor-discovery server statistics interface tunnel
interface-number
On an ENDS, display ENDS
information.
display vxlan neighbor-discovery server summary