H3C Technologies H3C WX5000 Series Access Controllers - Manual (Page 46)

5-6
Enter your choice(0-9):
BootWare Submenus
Serial submenu
You can upgrade application files, change the serial interface baud rate, and so on through the serial
submenu.
Enter 2 on the BootWare main menu to enter the serial submenu. The system displays:
=============================<Enter Serial SubMenu>=============================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
================================================================================
Enter your choice(0-5):
Ethernet submenu
Enter 3 on the BootWare main menu to enter the Ethernet submenu. The system displays:
============================<Enter Ethernet SubMenu>============================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
================================================================================
Enter your choice(0-5):
Items in this submenu are described in the following table.
File control submenu
Enter 4 on the BootWare main menu to enter the file control submenu. The following information is
displayed:
=================================<File CONTROL>=================================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
================================================================================
Enter your choice(0-3):