Specifying a startup configuration file, Using the cli, Delete a file – H3C Technologies H3C WX5000 Series Access Controllers User Manual
Page 64: Using the bootware menu, 24 delete a file
5-24
Specifying a Startup Configuration File
Using the CLI
You can use the startup saved-configuration cfgfile command to specify the configure file to be used
for the next startup of the access controller. cfgfile represents the name of the configuration file to be
specified.
# Specify the configuration file to be used for the next startup of the access controller.
<H3C> startup saved-configuration startup.cfg
Please wait ...
... Done!
# Display the configuration file used for the current startup and that to be used for the next startup of the
access controller.
<H3C>display startup
Current startup saved-configuration file: cfa0:/startup.cfg
Next startup saved-configuration file: cfa0:/startup.cfg
# Cancel the configuration file specified for the next startup of the access controller.
<H3C>undo startup saved-configuration
Please wait ...... Done!
<H3C>display startup
Current startup saved-configuration file: cfa0:/startup.cfg
Next startup saved-configuration file: NULL
Delete a File
Using the BootWare menu
Enter 3 on the file control submenu, and the system displays the following information:
Deleting the file in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 10323352 Aug/20/2008 10:42:42 M cfa0:/main.bin |
|2 33 Aug/20/2008 10:06:24 N/A cfa0:/system.xml |
|3 842 Aug/20/2008 10:23:56 N/A cfa0:/startup.cfg |
|4 76960 Aug/15/2008 15:58:02 N/A cfa0:/vmetest.vme |
|0 Exit |
============================================================================
Enter file No:
Type a file sequence number and press Enter. The system asks you to confirm your operation:
The file you selected is cfa0:/startup.cfg,Delete it? [Y/N]
Enter Y for confirmation. The following message appears, indicating the file was successfully deleted.
Deleting..........Done!
Using the CLI
Execute the delete [ /unreserved ] file-url command in user view to delete a file, where: