Grass Valley DD35 Family v.3.1.5 - Manual (Page 230)

3. Menu Operation DD35 Production Switcher
3 – 78 Operating Instructions – Rev. 16 / 10.2001
For details refer to section Introduction.
See section 3.8.6. The table in this sections contains all wipe patterns available in
the switcher together with their specific wipe number (in line with SMPTE). The
table also indicates which modifiers are possible with the individual wipe patterns.
Note: Softness and Border is possible with all listed patterns!
Enables the modifier Matrix for the selected wipe pattern.
See Adjust menu for details.
Enables the modifier Aspect for the selected wipe pattern.
See Adjust menu for details.
Enables the modifier Rotation for the selected wipe pattern.
See Adjust menu for details.
Enables the modifier Multi for the selected wipe pattern.
See Adjust menu for details.
Enables the modifier Modulate for the selected wipe pattern.
See Adjust menu for details.
Enables the modifier Border for the selected wipe pattern.
See Adjust menu for details.
Enables the modifier Softness for the selected wipe pattern.
See Adjust menu for details.
The Modifier Reset button can be used to reset the enabled modifiers all at once.
In this twin button two functionalities are embedded. A normal single click means
activating the OK button. Double clicking means pressing the Digits button.
For details refer to section Introduction.
Menu Lock
Wipe Modifiers:
– Matrix
– Aspect
– Rotation
– Multi
– Modulate
– Border
– Softness
– Modifier Reset
OK / Digits