Grass Valley Kaleido-MX (1RU) v.7.80 - Manual (Page 20)

6
Installation
Frame Interface
Kaleido-MX 8 × 1, and 8 × 2
Kaleido-MX systems with 8 inputs are available in single-head and dual-head models. They
share the same rear-panel layout, including 8 input connectors, 2 HDMI outputs, 2 HD-SDI
monitoring outputs, 2 analog audio outputs, 1 SDTI audio input, 1 LTC input, 1 reference
input, 1 Ethernet connector, 1 RS-422 connector, 20 GPI inputs, and 8 configurable GPI
input/output.
Kaleido-MX-8x2 rear panel (same panel as Kaleido-MX-16x2)
Kaleido-MX 16 × 1, 16 × 2, and 16 × 4
Kaleido-MX systems with 16 inputs are available in single-head, dual-head, and quad-head
models.
• The single-head and dual-head models share the same rear-panel layout, including
16 input connectors, 2 HDMI outputs (one of which is not enabled, in the case of the
single-head model), 2 HD-SDI monitoring outputs, 2 analog audio outputs, 1 SDTI
audio input, 1 LTC input, 1 reference input, 1 Ethernet connector, 1 RS-422 connector,
20 GPI inputs, and 8 configurable GPI input/output.
Kaleido-MX-16x2 rear panel
• In addition to the 16 input connectors, the quad-head model has 4 HDMI outputs,
4 HD-SDI monitoring outputs, 1 SDTI audio input, 1 LTC input, 1 reference input,
2 Ethernet connectors, 1 RS-422 connector, 20 GPI inputs, and 8 configurable GPI
input/output.
Kaleido-MX-16x4 rear panel
Note: The Kaleido-MX (1RU) offers a wide variety of ports for incoming and
outgoing signals. With a view towards future expansion, there are ports
whose connections exist but that are currently not fully supported. The
FlexBridge IN ports are reserved for future expansion, and the SFP ports are
not yet supported.
Note: In the case of the HDMI outputs, HD-SDI monitoring outputs, and
analog audio outputs, in each pair, the output associated with the second
head is NOT enabled if your Kaleido-MX is a single-head model.