Grass Valley Kaleido-MX (1RU) v.7.80 - Manual (Page 22)

8
Installation
Handling the Front Door
• Two serial port adapters (one with straight cabling and one with crossover cabling —
see RS-422 connection diagram , on page 12):
• The Kaleido-MX (1RU) Quick Start Guide
• DVD including the Release Notes for the current version of the Kaleido-X software, the
Kaleido-X User’s Manual, database samples, Quick Start guides and hardware reference
manuals for all multiviewer models
Handling the Front Door
The front door of the Kaleido-MX (1RU) frame is fastened in place by two captive
thumbscrews, one at each end of the door.
Opening the front door
To open the door
• Turn both thumbscrews counterclockwise until they release, and then pull the door
away from the front of the frame.
The door is attached to the frame by guides that slide out of the frame as the door is
pulled, and allow the door to be lowered below the frame so that cards and power
supplies can be removed and installed.
Part number Adapter cabling RS-422 pinout at the DE-9P connector
1737-3000-102 Straight Controller (SMPTE master) mode
1792-3700-100 Crossover Tributary (SMPTE slave) mode
Note: In line with our commitment to environmental preservation, only the
Quick Start Guide for your multiviewer model, and some ancillary
documents (e.g. welcome letters, warranty cards) are distributed in printed
form. All manuals and the Release Notes are available on the DVD that
shipped with your multiviewer. See the Documentation section of the
Release Notes for a complete list. You can obtain the latest version of the
manuals, the Release Notes, as well as software and useful data, from the
Documentation Library section of Grass Valley’s website.