Grass Valley Kaleido-MX (1RU) v.7.80 - Manual (Page 33)

19
Kaleido-MX (1RU)
Hardware Description & Installation Manual
To remove the air filter
1 Open the front panel of the frame (see Opening the front door , on page 8).
2 Grasp the top of the filter installed on the rear of the door, and pull it gently out of its
mounting slot.
To install a filter
1 Slide the filter into the slot at the bottom of the front panel door, and ensure that the
filter is not bunched or folded.
2 Close the front panel of the frame (see Closing the front door , on page 9).