Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 245)

KAYENNE K-FRAME — User Manual 245
Control Panel Overview
Figure 135. Transition Module Status Display Example
Additionally, when the Key Prior button (Keyer Priority) is pressed on the
Transition Module, Row 4 changes from displaying transition rates to
Keyer Priority for Keyers 1-6 and shows the differences between the current
and next priority stacks.
Function Buttons
The top button row, above the lever arm ( Figure 134 ) provides the fol-
lowing functions (from left to right):
Exchange ME (button icon, left)—Toggle button for fast exchange (tem-
porary delegation) of an ME not delegated to a Stripe (see Exchange
ME
on page 263 for more information).
Pat Lim —Inactive.
EMEM Run —Runs an E-MEM from the Local or Master E-MEM Module.
• SPOP (single button push) of the EMEM Run button delegates the
lever arm to control the local E-MEM.
• DPOP (double button push) of the EMEM Run button delegates the
lever arm to control the Master E-MEM timeline.
• Pressing the E-MEM Run button again, exits the mode.
• Trans Rate —Allows Auto and Key Mix 1-6 buttons having an associated
transition rate to be altered, set, or queried. Once the Trans Rate button
is selected, the associated buttons flash and the Local E-MEM Module
changes to Trans Rate Mode for input. Pressing one of the flashing
buttons indicates that its transition rate is to be set. While holding down
this button any of the other flashing buttons can be pressed for multiple
selection.
8623267_07
7 7
2
2
BLK
BLK
BLK
BLK
MIX
MIX
Bkgd Bkgd
MIX
MIX
10
10
ME1 ME1
MIX
MIX
10
10
17 17
MIX
MIX
10
10
15 15
23
23
MIX
MIX
10
10
12 12
MIX
MIX
30
30
BLK BLK
MIX
MIX
30
30
i DPM DPM i DPM DPM i DPM DPM i DPM DPM i DPM DPM i DPM DPM
Row 1: BKD A source (Green) and video
sources for relevant keyers (Yellow)
Row 2: BKD B source (Green) and key
sources for split keys (Yellow)
Row 3: BKD C source (Green) and keyer
transition types (Yellow)
Row 4: BKD D source (Green) and keyer
transition rates (Yellow)
Row 5: BKD transition type (Green), iDPM
keyer partition (Primary-White and
Secondary-Green), and keyer ON (Orange)
BKGD
Bus
Keyer 1 Keyer 2 Keyer 3 Keyer 4 Keyer 5 Keyer 6
i-DPM Keyer
ON/OFF Primary Partition (White)
Secondary Partition (Green)
ON/OFF
Figure 136. Exchange ME Button Icon