Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 270)

12-2 Krystal 4300 Reference
Section 12 — User Assist Menus
Master Timeline
The Master Timeline display gives information about each delegated
channel’s work buffer at the current time in the effect.
Effect Name
The name of the current effect is displayed on the top line of the Master
Timeline screen. Effect names are limited to 15 characters. If no name has
been given to the effect, then the register number will be shown (ex.
“Register17”).
Effect Duration
The duration of the current effect is displayed in the upper right above the
Master Timeline next to the Effect Name (example: NDur: 10:00). Effect
duration is based on the displayed channels’ timeline. An “N” indicates
normal duration, and an “F” indicates forced duration.
Master Timeline
The top portion of the Master Timeline screen is devoted to displaying the
Master Timeline. The Master Timeline graphically shows the positions of
keyframes which are derived from delegated/enabled channel keyframes.
The Master Timeline only reflects information from currently enabled
channels. If a channel is disabled, its keyframes no longer contribute to the
current effect, so the keyframes on the Master Timeline are updated.
Register Number
The register number of the current effect appears beside the Master Time-
line. This number may be between 0 and 99 on the Krystal system.
MASTER TIMELINE
SELECT
SELECT
ALL
SCROLL
SELECT
CHANNEL 1
*BORDER
*defocus
LOCATE
srcMem CHANNEL 2
BORDER
DEFOCUS
kurl
locate
SRCMEM
3----------------------------------------- 4----------------------------------------- 5----------------------------------------- 6
Reg 17:
5 of 20
[4:00]
OFFSET
0:00
TIME
4:00
NewsAtTen N Dur: 9:00
ZOOM
2