Grass Valley M-2100 - Manual (Page 26)

2-2 MMCP Installation/Operation Manual
Section 2 — System Operations
Introduction
The Mini Manual Control Panel shown in Figure 2-1 , provides an alterna-
tive to automated control of the M–2100 Serial Digital Master Control
System. A single MMCP can control up to sixteen channels (frames), eight
channels selectable at any given time. Automation can be disabled at the
MMCP for each of the Audio/Video/Control Processors.
Figure 2-1. Mini Master Control Panel
Audio
Ratio
PGM Level
PST Level
Primary Over
V A
Non Sync
Monitor
Volume
Audio Monitor Channel Control Keyer Control
Hue
Clip Sat
Gain
Bright
Opacity
User
PGM
PST
PROGSRC3 PROGSRC5 PROGSRC7
PROGSRC2 PROGSRC4 PROGSRC6 PROGSRC8
Video
PROGSRC1
V A
Non Sync
Transition Next Transition Mode Transition Rate
Mo de
Func
PreRoll
Transition
MINI MASTER CONTROL
8129_12
Channel Controls Automation Controls Keyer Controls GPI Buttons (2) Audio Monitor Controls
Mode/Function Button
PreRoll/Transition Button Audio Controls
Next Transition Buttons Audio/Video Breakaway Mode
Source Displays PST Bus
PGM Bus
Transition Type Buttons (5)
Transition Rate Buttons (3)