Appcenter control options, Local control, Remote control – Grass Valley M-Series iVDR User Manual v.2.0.10 User Manual

Page 71

Advertising
background image

20 April 2005

M-Series User Manual

71

AppCenter control options

AppCenter control options

Local Control

Keyboard, mouse, and monitor – Connecting a keyboard, monitor and mouse to the
iVDR rear panel provides access to AppCenter. You can use a mouse and keyboard
shortcuts to control the iVDR.

Front Panel – The optional Front Panel comes mounted on the front of the chassis,
however, it can be removed and operated remotely using an optional front panel
accessory kit which includes a 15 foot extension cable and front panel cradle.

See

“Guide to using the Front Panel” on page 83

. USB connectors on the edge of the Front

Panel allow you to connect a USB device, such as, a disk, memory stick, mouse,
keyboard, or transport control device. The keyboard is used for text entry and
provides keyboard shortcuts to control the iVDR. A transport control device that
emulates a keyboard can be used to control the iVDR through keyboard shortcuts.

Remote Control

GPI I/O – GPI input triggers can be assigned to channels to control actions such as
record, play, stop, and skip a playlist event. GPI output triggers can be defined for
channels and inserted in playlists to control external equipment as the list is played.

See “Configuring GPI inputs/outputs” on page 121

.

Serial Control Protocols over RS-422 – The iVDR can be controlled by devices and
applications software developed for the M-Series iVDR that use serial control
protocols over the RS-422 serial port.

See “About remote control protocol support”

on page 278

.

Remote Control Protocols over Ethernet – The iVDR can be controlled by devices
and applications software developed for the iVDR that use serial control protocols
over the Ethernet network.

See “About remote control protocol support” on page 278

.

VAR

JOG

SHTL

R1

P2

P1

R2

Front Panel

(Mounted or Desktop)

Keyboard, Mouse

and Monitor

(Connect to Rear Panel)

VAR

JOG

SHTL

R1

P2

P1

R2

Remote Control

Protocol

over Ethernet

(AMP)

Remote Control

Protocols

over RS-422

(BVW, AMP, VDCP)

GPI Control

Advertising