Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 139)

135 MAESTRO User Manual
Section 2 — The Maestro Configuration Editor
DVE Configuration
Note For more information about the DVE option see the DVE section of the
Maestro User manual.
When the DVE Configuration option is selected, the editor will open a set
panel. After naming the table, select “New.” The system will display a table
similar to that shown in
Figure 75 .
Figure 75. DVE Configuration
Effect Name
Enter or select a name which describes the effect. This field is required and
it cannot be blank. This name will appear on the top line of text in the
Effects
LCD button in the Effects section of the Control panel. Names that are
longer than nine (9) characters will be truncated on the LCD button
Enter Effect
Select an Enter effect from the drop-down list. The Enter Effect selection
describes the way in which the effect will be presented as it transitions to
air. The “Enter Effect” names describe which background video bus (PGM,
AUX, and PST) will occupy the squeeze window and are on the PGM bus
at the end of the transition.
Note The source that occupies the squeeze window after entering an effect will
always be on the PGM bus regardless of which bus it was on when selected.