4 ru m/c frame, Automation interface – Grass Valley Maestro Master Control v.2.4.0 User Manual
Page 40
MAESTRO User Manual
36
Major Components
4 RU M/C frame
The 4 RU M/C frame has only one Maestro board. The Maestro board must
only be mounted in the bottom slot (Slot 2 see
Figure 6. 4 RU M/C Frame
Automation Interface
In many applications, the Maestro Master Control switcher will be con-
trolled by a third-party automation computer that is connected to the Auto-
mation port. The automation computer must send commands as described
in the Maestro automation protocol manual. For more information contact
Technical Support, see Contacting Grass Valley
on page 4
.
The current Maestro automation protocol manual can be found at
http://www.grassvalley.com/products/maestro/
Click the
Manuals
hyperlink. A new window will then appear. The Maestro
automation protocol manual is located under the Manuals section.
8384_17
Controller Modules
Power Supply Modules
Slot 2
Slot 1
Slot 1
Slot 2
Slot 1
Slot 2