9th step: general, Channel server, And t – Grass Valley Maestro Master Control Installation v.2.4.0 User Manual
Page 252
252
MAESTRO Installation and Service Manual
Section 5 — The Maestro Configuration Editor
9th Step: General
The 9th Step: General has the following steps:
•
Channel Server
•
GUI Configuration
These steps are explained in detail below.
Channel Server
“Channel server” refers to the CP Panel Server board and/or the PCI Panel
Server board. The CP Panel Server board is contained within the hardware
control panel; the PCI Panel Server may or not be present.
Figure 147. Channel Server Table (Example)
Channel Server Name
Create a Channel Server Name.
This is the source of the name that appears on the GUI Configuration table
(
Board Name
Select a previously defined control panel from the Network Description
table (
If there is no hardware control panel, this will be the name of the PCI Panel
Server board.
Channel Delegation Set
Select a previously defined Channel Delegation set (
).