Updating fpgas/cplds, To updating fpgas/cplds – Grass Valley Maestro Master Control Installation v.2.4.0 User Manual
Page 276
Advertising
276
MAESTRO Installation and Service Manual
Section 6 — Deployment Control Center
Updating FPGAs/CPLDs
Follow these steps to update an FPGAs/CPLDs (FPGA = Field Program-
mable Gate Array. CPLD = Complex Programmable Logic Device.)
1.
Updating FPGAs/CPLDs on the Processor board(s):
Note
Some of the FPGAs on the Processor are updated using the Software Version
Update and Apply procedure described above. The remaining FPGAs on the
Processor are updated using the procedure below.
a.
In the board Status section of the Maestro Deployment control
center, select the Processor to update.
b.
Right-click on the “Running” FPGA field for this Processor. See
Figure 165. “Running” FPGA Version
This step will display the FPGA/CPLD update menu. See
Advertising
This manual is related to the following products: