HEIDENHAIN PWM 20 - Manual (Page 26)

Operating Instructions en PWM 20
28
7 Removal, environmental protection
and disposal
Special safety measures may have to be
observed when dismounting the device from an
NC-controlled machine. For more information,
see "Safety precautions for operation with and in
machines.", page 21.
Furthermore, the safety precautions described
for installation apply, see "Installation", page 22.
Preparation
Set the power switch to the
0 position.
Unplug the unit's power connector.
Unplug all connections.
7.1 Removal
Storage after removal
If the product will be temporarily stored after removal, the
specified ambient conditions must be maintained, see
"Specifications", page 29.
Repackaging
Repackaging should correspond to the original packaging as
closely as possible:
Connect all screw-mounting elements to the product or
repackage them in the same way they were originally
shipped from the factory.
Repackage the product, foam and cardboard box insert
as originally shipped from the factory.
Place all other components in the original packaging as
received from the factory, see "Items supplied", page 21.
Enclose all the documentation that were included in the
original packaging, see "Storage and distribution of the
documentation", page 18.
When returning the product for servicing, it
is
not necessary to ship the accessories and
measuring devices with the product.
7.2 Environmental protection and disposal
NOTICE
Incorrect disposal of the product, accessories or
peripherals!
May cause environmental damage!
Do not dispose of in domestic waste!
Electrical waste and electronic components are
subject to special-waste regulations and must be
disposed of by authorized collection points only.
The applicable country-specific regulations must be
observed.
More detailed information on legal regulations can
be obtained from competent authorities (such as
national and regional water management authorities
and environmental agencies).
If you have any questions about disposal, please
contact the manufacturers.