EverFocus EDR-1610A User Manual
Page 37
EDR910_1610_ma_en_rev1
00
- 37 -
3.7 NETWORK MENU
Define all network-related settings in this menu.
These settings should only be carried out by skilled personnel qualified for network
installation; if the DVR is implemented in existing networks, the network administrator
should be consulted.
This chapter doesn‘t go into basic network technique details. For further information,
especially about router installation and internet connection, please refer to the
publication "EverFocus network technique".
3.7.1 NETWORK
Define the basic DVR TCP/IP settings in the NETWORK menu:
CONFIG
(1) IP CONFIG:
DHCP: ( Dynamic Host Communication Protocol), automatic IP number assignment (if
supported by the network).
FIXED IP: manual IP number assignment
(2) IP ADDRESS:
Enter the DVR’s IP address. If DHCP is activated, IP address is assigned automatically.
(3) SUBNET MASK:
Local network subnet mask: If DHCP is activated, subnet mask is assigned automatically.
(4) GATEWAY:
Network gateway IP address for external access. If DHCP is activated, gateway address is
assigned automatically.
(5) DNS SERVER:
Local network DNS server IP address. If DHCP is activated, DNS server address is
assigned automatically.
NETWORK SETUP MENU
CONFIG
IP CONFIG.
FIXED IP
ALARM
IP
ADDRESS
192.168.001.200
SUBNET
MASK 255.255.255.0
PASSWORD GATEWAY 192.168.001.100
PPPoE
DNS
SERVER
192.168.001.110
DDNS
MULTICAST
NO
IP
ADDRESS
192.168.001.001
PORT
32768
HTTP
PORT
00080
CONTROL
PORT
01600
DATA
PORT
37260
BW
CONTROL
8192
KB
MAC ADDR 00:11:14:01:83:2A