EverFocus EDR-1610A - Manual (Page 60)

EDR910_1610_ma_en_rev1 00 - 60 -
CALL MONITOR SETUP
7. CALL MONITOR SETUP
Enter the call and matrix monitor setup menu by pressing the CALL key:
Define the following settings in the CALL menu:
Press ENTER to select the respective monitor and the selection options:
(1) SEQ:
“ON" activates the monitor’s sequence mode (automatic sequential
switch).
(2) OSD: “ON" activates the monitor’s status display including camera number,
monitor number and active alarms for this monitor.
(3) CAMERA: Select the camera to be displayed with the channel keys 1~9 (EDR910)
resp. 1~16 (EDR1610).
CALL MENU
MONITOR SEQ
OSD CAMERA
CALL MON OFF ON 01
PRESS SEQ/MIDDLE TO ON/OFF SEQ
PRESS DISPLAY TO ON/OFF OSD
PRESS CHANNEL NO/WHEEL TO SET CAMERA