EverFocus EDR-1610A - Manual (Page 50)

EDR910_1610_ma_en_rev1 00 - 50 -
3.12 SYSTEM MENU
Define the following settings in the SYSTEM menu:
(1) SYSTEM VERSION:
Display of the installed firmware version.
(2) SYSTEM VIDEO FORMAT:
Display of the detected video system PAL. The EDR automatically detects the video
system upon system startup.
(3) SAVE/LOAD CONFIGURATION:
Selecting YES opens a sub menu showing the following items (use the JOG for
selection):
CANCEL: Return to system menu
DEFAULT: Load default setting after security request
YES/NO
ATTENTION: The network settings remain
stored despite loading default setting!
SAVE: Save the current configuration to CF card /
USB stick.
LOAD: Load a configuration from CF card / USB
stick.
(4) UPDATE SYSTEM SOFTWARE:
DVR update with latest firmware version through USB-stick or CF card. At first, place the
CF card or the USB stick into the respective interface.
YES: After confirmation with SELECT, the firmware update is run.
Update is carried out in 3 phases (display at bottom screen
margin) and can take up to 5 minutes.
ATTENTION: 1. Before starting the update, stop the recording process.
2. Do not switch the DVR off while update is run.
3. Do not remove CF card or USB stick while update is run.
NO: Cancel, return to SYSTEM menu
ATTENTION: After updating the system, restart, loading of default settings and further
restart are required. Furthermore, HDD should be deleted.
SYSTEM SETUP MENU
SYSTEM VERSION
V1.00
SYSTEM VIDEO FORMAT PAL
LOAD/SAVE CONFIGURATION
NO
UPDATE SYSTEM SOFTWARE NO
LANGUAGE ENGLISH
QUICK PLAY ON 10 MINUTES AGO
SYSTEM PASSWORD ENABLE
NO
PASSWORD
RIGHTS
LEVEL-3 ************* ADMINISTRATOR
LEVEL-2 ************* OPERATOR
LEVEL-1 ************* GENERAL