Network access – EverFocus EDR-1610A User Manual

Page 64

Advertising
background image

EDR910_1610_ma_en_rev1

00

- 64 -

NETWORK ACCESS


11. NETWORK ACCESS WITH INTERNET EXPLORER


11.1 PC SYSTEM REQUIREMENTS:

Operating system Windows XP SP2 / Windows 2000 SP6, DirectX 9.0c, Internet Explorer
min. 6.x.


ActiveX applications must be permitted in the Internet Explorer settings.

The loading and installation of ActiveX components during initial installation require local
PC administration rights.


The following elaborations assume the proper DVR network connection installation.


11.2 FIRST TIME INSTALLATION ActiveX COMPONENTS

The EDR recorder series use an ActiveX application for remote viewing at PC.

This application will be loaded and installed at the first access with Internet Explorer.
Make sure, that your security settings at the PC allow ActiveX installations.

(Internet Explorer: OPTIONS > SECURITY SETTINGS > CUSTOM LEVEL:
activate installation and executing of safe ActiveX components and Plugins).

In several network installations the user rights for these settings are restricted by group
user right policy. In this case contact your network administrator for changing the

settings.

Troubleshooting:

If the PC had before network access to EDR recorders with first firmware versions, a
message like this may appear after Login:


In this case the old ActiveX application needs to be deinstalled manually:

Type in following commando lines in DOS prompt or under > START > RUN:

regsvr32 -u -s %windir%\system32\pentaocx.ocx > ENTER

regsvr32 -u -s %windir%\system32\erviewer.ocx > ENTER

This will uninstall the old applications in your Windows system.

Advertising