LinPlug CrX4 - Manual (Page 43)

The Divider Mode popup menu determines how the output sample value is
created from the input samples. Three options are available:
– AVG” (Average) option calculates the average of the input samples
and uses this as the output sample value for each of the input samples.
– STP (Step) option takes the first sample in each group of input
samples and uses this as the output sample value for each of the input
samples.
– SLD (Slide) option takes the first sample in each group of input
samples, interpolates between them and uses the interpolated value as the
output sample value for each of the input samples.
The Fil Post Div (Filter Post Divider) button is used to set the position of the
Crusher’s Filter with respect to the Divider. By default, the Filter is before
the Divider in the signal path. Switching this button on moves the Filter to
after the Divider in the signal path.
The Smoother button allows a compressor / expander to be switched into
the signal path. This reduces the overall effect of the Crusher making the
sound less harsh and more “musical”.
CrX4 User Manual 43