Logitek Electronic Systems Mosaic - Manual (Page 16)

Logitek Mosaic Reference Manual
Page 16
AE-2: This is the backup data connection. The redundant JetStream feature is not currently
functional and this port should be left empty.
While we use RJ-45 patch cables to send data from the JetStream to the surface, this is RS-485 data
plus an AES pair for cue and not Ethernet data. Do not connect these data cables to a network
switch.
You can use a dedicated CAT5 patch cable or existing structured cabling for the data connection. If
using structured cabling systems, care should be exercised to ensure the serial connections are not
confused with other network outlets and that the link is not unintentionally “un-patched”.
The connection to the power supply should be a straight through RJ-45 connection and not pass
through wiring blocks or other interconnects for best results. The power cable between surface and
power supply passes 12 volts.
PS U PS U PS U PS U
The Mosaic is powered by a rack mounted external power supply included with the console. Dual
power inlets supply dual power supplies. A RJ-45 connector is used to send power and GPIO
information from the supply to the surface.
DB-25 connectors are provided on the Mosaic Power Supply for GPI Input and Output
connections. A ground lug is provided on the chassis for your convenience.