Logitek Electronic Systems Mosaic - Manual (Page 9)

Logitek Mosaic Reference Manual
Page 9
System Requirements
Mosaic is designed to connect to a Logitek JetStream running DSP version 4.x and above and the
AE-32 Audio engine using v3.87 or higher. Contact Logitek Electronic Systems or your reseller if
you are unsure of compatibility, or are adding a Mosaic surface to a pre-existing Logitek facility.
S ys tem Architecture S ys tem Architecture S ys tem Architecture S ys tem Architecture
Put simply, the Mosaic surface is just a remote control panel for the JetStream. Unlike traditional
analog consoles, no audio passes through the Mosaic or its faders (with the exception of the cue
speaker audio). The Mosaic talks to the JetStream using the Logitek Command Protocol, with all
audio processing occurring inside the router.The mixing, routing and processing of audio is not
Con sole Surfaces
Jetstream
1 Audi o
Net work
Surfaces Audio Engines Ethernet Switches
Con trol Panels
Con sole Surfaces
Jetstream
2 Con trol Panels
Busine ss
Network
Serial Co mms IP TCP/IP
Remote Support
Software vTools
Software vTools
Surfaces are re mote
contro l pa nel s for
Audi o Engi ne Audio E ngines
process Audio a nd
GPI co ntrol events Networ k switches
distribute au dio,
control & sync
Cl ie nt PCs
Softwa re tools provide
remote con trol &
system maintena nce
internet
Software vTools
S er ial
TCP/IP
UDP/IP
Figure 1 - Logitek System Architecture (v4. x)