Casio QV-2300UX - Manual (Page 100)

PLAYBACK
E-100
Using the Slide Show Feature
Slide Show automatically plays back images in sequence at
a fixed interval.
1.
Enter the PLAY mode.
2.
Press MENU.
3. Select “SLIDE SHOW”, and then press the
shutter release button.
• This starts the slide show.
• Pressing MENU at this point displays a screen for set-
ting the interval between image changes within the
range of three to 30 seconds.
4. To stop Slide Show, press any button besides
the shutter release button.
IMPORTANT!
• Auto Power Off (page E-36) is disabled whenever
Slide Show is being used. This means you should not
leave Slide Show running when using batteries to
power the camera. Doing so can rundown batteries.
Be sure to stop Slide Show and turn off the camera
after you are finished.
• Note that all buttons are disabled while an image
change is in progress. Wait until an image is stopped
on the monitor screen before performing a button op-
eration, or hold down the button until the image stops.
• Images copied from another digital camera or a com-
puter may take longer time to appear than the Slide
Show interval time you select.