Casio QV-2300UX - Manual (Page 52)

BASIC IMAGE RECORDING
E-52
Using the Flash
The following describes various flash settings you can make
to suit the type of image you are trying to record.
1. Enter the REC mode.
2.
Press to cycle
through the available
flash modes until the
indicator for the one
you want is on the
monitor screen.
• Each press of cycles through the available flash
modes described below.
SHIFT
INFO
MF
Flash
mode
To do this
Have the flash fire automatically
when required (Auto Flash)
Turn off the flash (Flash Off)
Always fire the flash (Flash On)
Fire a pre-flash followed by image
recording with flash, reducing the
chance of red-eye in the image (Red-
eye Reduction)
Select this setting
No display