Casio QV-2300UX - Manual (Page 124)

CONNECTING TO EXTERNAL EQUIPMENT
E-124
■ Windows
The Data Transfer Cable connects to an IBM PC/AT or com-
patible equipped with a D-Sub 9-pin RS-232C serial port, as
shown below.
DIGITAL terminal
USB VIDEO OUT
DC IN 6V
DIGITAL
Serial port
(RS-232C D-Sub 9-pin)
Data Transfer Cable
• Never disconnect the USB cable while a data communica-
tion operation is in progress. Doing so can corrupt memory
data.
• USB data communication is supported in both the REC
mode and PLAY mode.
• Be sure to disconnect the USB cable from the camera and
computer after you are finished exchanging data.
• You cannot turn off the camera while the USB cable is con-
nected. Disconnect the USB cable first when you want to
turn off the camera.
Using a Serial Port Connection
You can connect a computer to the camera’s DIGITAL termi-
nal for image data uploading and downloading. For such a
connection, you must install the Photo Loader software from
the bundled CD-ROM disc on your computer, and use a
separately available CASIO data transfer cable to make the
connection. The type of cable you should use depends on
what kind of computer you are connecting to.
• This manual covers actual physical connection proce-
dures. See the documentation on the Bundled Software
User’s Manual for full details about connections, installing
Photo Loader, and other information.