Casio QV-2300UX - Manual (Page 77)

OTHER RECORDING FUNCTIONS
E-77
3.
Select “FUNCTION” “Exposure Mode”, and
then press the shutter release button.
4.
Select “S” (Shutter speed priority), and then
press the shutter release button.
5.
While holding down SHIFT INFO, use [+] and [–]
to specify the shutter speed.
6.
Press the shutter release button to record the
image.
Shutter
Speed
Press this button
[+]
[–]
To do this
Increase shutter speed
Decrease shutter speed
IMPORTANT!
• It is often difficult to obtain proper brightness when
shooting a subject that is very dark or very light. In
such a case, try different shutter speed settings to find
the one that produces the best results.
• When the Shutter Speed is set to “BULB”, exposure
continues as long as you depress the shutter button.
Because of this, use of the wired remote control unit is
recommended whenever using the “BULB” setting.
• The self-timer is disabled while the Shutter Speed is
set to “BULB”.
• The slowest shutter speed when “BULB” is selected is
60 seconds.
• Note that using a slower shutter speed increases the
chance of static being present in your image, and the
amount of static visible in an image is inversely pro-
portional to the shutter speed.
• At shutter speeds of one second or slower, the cam-
era automatically performs internal data processing
intended to limit image static, so the image record op-
eration takes longer at slow shutter speeds. At shutter
speeds of one second or greater, doubling the shutter
speed setting tells you about how long it takes for an
image to be recorded. For example, image recording
with a shutter speed of one second takes about two
seconds.