Casio QV-2300UX - Manual (Page 88)

OTHER RECORDING FUNCTIONS
E-88
Specifying Contrast
Use the following procedure to control the difference be-
tween the light areas and dark areas of the image.
1. Enter the REC mode.
2.
Press MENU.
3.
Select “FUNCTION” “Contrast”, and then
press the shutter release button.
4.
Select the setting you want, and then press the
shutter release button.
To do this
Increase contrast
Leave contrast as it is
Decrease contrast
Select this
High
Normal
Low
NOTE
• The contrast setting you make is not used in the Night
Scene Mode.
Specifying Power On Default Settings
Configuring the camera’s “mode memory” controls power on
default settings. Turning a mode memory item on specifies
that the setting of the item when the camera is turned off
should be restored when the camera is turned back on
again. Turning a mode memory item off specifies that its fac-
tory default setting should be used whenever the camera is
turned on.
1. Enter the REC mode.
2.
Press MENU.
3.
Select “FUNCTION” “Mode Memory”, and
then press the shutter release button.
4.
Select the item whose mode memory status
you want to change, and then press the shutter
release button.
5.
Select the setting you want, and then press the
shutter release button.