Casio QV-2300UX - Manual (Page 53)

BASIC IMAGE RECORDING
E-53
Flash Status Indicators
You can check the current flash unit status by checking the
monitor screen indicator and operation lamp while the shut-
ter release button is pressed about half way down.
■ Operation lamp
■ Monitor screen
When you have Auto Flash or Red-Eye Reduction selected
as the flash mode, the indicator
appears on the display
when you press the shutter release button about half way
down to indicate that available light is insufficient and the
flash will be fired.
SHIFT
INFO
MF
It means this
Flash unit is charging
Flash unit cannot be
charged for some reason
If the operation lamp is doing this
Flashing amber
Flashing red
Adjusting the Flash Intensity
Use the following procedure to adjust the intensity of the
flash when it fires.
1. Enter the REC mode.
2.
Press MENU.
3.
Select “FUNCTION” “Flash Intensity”, and
then press the shutter release button.
4.
Select the setting you want, and then press the
shutter release button to apply it.
To do this
Fire the flash with strong intensity
Fire the flash with normal intensity
Fire the flash with weak intensity
Select this setting
Strong
Normal
Weak
Operation lamp